The Carlson Company - Your Source for Professional Service Equipment
Serv-Equip Honing Machine
Honing Machine
The PS1370 Power Stroke Cylinder Honing Machine is an ideal machine for the motorcycle/small engine shop. Filling an important need of powersports dealers and machine shops, this power-stroking machine hones cylinders with controlled accuracy. Utilizing a clean, recirculating, 8 gallon, oil-bath environment, the machine helps the operator produce a consistent RMS surface finish every time. It detects and corrects tapered bores, while taking the work out of honing piston clearance.
Features of the Serv-Equip Honing Machine
- Faster, Easier & Safer: Foot control included. Power Head traverses sideways on ball bearings for easy positioning
- Versatile: Can accommodate singles, and many twins, triples and fours
- Hones Cylinders With Torque Plate Attached
- Stroke: Adjustable by setting limit switches 8" max.
- Stroke Speed: Fully adjustable
- Load Meter: Indicates if bore is straight or tapered
- Pause Button: Permits manual stroking override
- Honing Oil: Pump re-circulates 8 gallons @ 5 GPM
- Dwell Button & Ammeter: Allows manual removal of taper
- Optional Friction Feed Hone Head: Allows effortless changing of honing diameter while running.
Specifications of the Serv-Equip Honing Machine
- Honing Range: 2.6" (66mm) - 5.6" (142mm)
- Stroke: Adjusts to 10" (254mm)
- Motor: ½ HP, 115V
- Air Requirements: 110 psi, @ 3 cfm
- Machine Dimensions: 32"w x 44"d x 60"h
